108

108 Engraving Cutter

Quality cutters for detail engraving, carving and routing in wood, fiberglass, plastic and soft metals.

  • Features

  • Specifications

  • Product Support

  • Other Products in the family

  • Quality cutters for detail engraving, carving and routing
  • For wood, fiberglass, plastic & soft materials
  • Not for use with hardened materials
  • Use higher speeds for hard woods, slower speeds for metals and very slow speeds for plastics
User Tips
  • Secure objects to a stable surface while working.
  • For best results, insert the accessory bit all the way into the tool and then back it out slightly before tightening down. This provides plenty of shank for the collet or chuck to hold onto the bit.
  • Use the sides of the cutter (rather than the tip) for effective cutting. The tip cuts poorly and can break under pressure.
  • Use higher speeds for hard woods, slower speeds for metals and very slow speeds for plastics (to avoid melting at the point of contact).
  • If chattering occurs, increase speed.
* bit diameter inch: 1/32"
* bit diameter mm: 0.8 mm
* description: Engraving Cutter
* description (au): Engraving Cutter
* shank diameter: 3/32", 2.4 mm
* Model Number:108
Speed Settings
View Speed Settings

Looking for additional literature?

Request Literature

Contact the Dremel Experts for additional assistance

Australia
Phone: 1-300-30-70-44
8 am - 5 pm

New Zealand
Phone: 0-800-54-33-53
8 am - 5 pm

Online:

Submit a question

OTHER PRODUCTS IN THE FAMILY

105
105 Engraving Cutter
106
106 Engraving Cutter
107
107 Engraving Cutter
109
109 Engraving Cutter
111
111 Engraving Cutter
113
113 Engraving Cutter