107 Engraving Cutter

Quality cutters for detail engraving, carving and routing in wood, fiberglass, plastic and soft metals.

Features
Specifications
Product Support
Other Products in the family

For detail engraving, carving and routing
For wood, fiberglass, plastic & soft materials
Not for use with hardened materials
Use higher speeds for hard woods, slower speeds for metals and very slow speeds for plastics

User Tips

Secure objects to a stable surface while working.
For best results, insert the accessory bit all the way into the tool and then back it out slightly before tightening down. This provides plenty of shank for the collet or chuck to hold onto the bit.
Use the sides of the cutter (rather than the tip) for effective cutting. The tip cuts poorly and can break under pressure.
Use higher speeds for hard woods, slower speeds for metals and very slow speeds for plastics (to avoid melting at the point of contact).
If chattering occurs, increase speed.

* bit diameter inch: 3/32"
* bit diameter mm: 2.4 mm
* description: Engraving Cutter
* description (au): Engraving Cutter
* shank diameter: 3/32", 2.4 mm
* Model Number:107

Speed Settings
View Speed Settings