Close Window
 

403 Nylon Bristle Brush

Use for light deburring, cleaning and polishing of silverware, jewelry and other precious metals. Can be used with polishing compound.

    • Ideal for general cleaning and polishing-especially in hard-to-reach places, such as slotted surfaces
    • Long-wearing nylon bristles
    • Can also be used for cleaning hard plastic or aluminum such as graphite golf clubs or aluminum wheels
    • Can be used with polishing compound
User Tips
  • For best results, insert the accessory bit all the way into the tool and then back it out slightly before tightening down. This provides plenty of shank for the collet or chuck to hold onto the bit.
  • Keep a light touch, letting the tips of the brush do the work. Too much pressure can break the bristles.
  • Before using on a material, allow the tool with brush to run at operating speed for at least one minute to discharge any loose bristles. Make sure no one stands in front of or in line with the brush.
  • The bristle brush can be used with polishing compound.
  • Do not run in excess of 15,000 rpm. Therefore, do not use with a Single-Speed MultiPro Rotary Tool or a Heavy-Duty Flex-Shaft Tool unless you use the #221 Foot Speed Control.
  • BIT DIAMETER INCH: 3/4"
  • BIT DIAMETER MM: 19.1 mm
* Model Number:403

Speed Settings
View Speed Settings

403 Nylon Bristle Brush

Looking for additional literature?

Request Literature

Contact the Dremel Experts for additional assistance

Phone:

1-800-437-3635

1-262-554-1390

(8am-6pm CT Mon-Fri)

Online:

Submit a question

Max Performance Tested program