475

475 Carbide Sanding Band

The Carbide Sanding Band is a versatile accessory that can be used for sanding and shaping flat, beveled or curved surfaces, as well as inside surfaces that are difficult to reach any other way. The band is 80 grit, and comes mounted on a sanding mandrel.

  • Features

  • Specifications

  • Product Support

  • Other Products in the family

  • Use on a variety of materials including woods, fiberglass, laminates, plastic, leather and even Styrofoam
  • Suggested applications include shaping a recessed area in baseboard trim for speaker and/or cable TV wires, sanding doors and window frames that stick
  • Also good for paint stripping, hobbies and crafts such as woodcarving and modeling
  • The carbide grit surface is extremely long-lasting and the edges of the band will stay crisp and sharp
User Tips
  • If the sanding band becomes clogged with material, simply wire brush it away, or for tough materials, remove the band from the mandrel and soak in solvent.
  • For best results, insert the accessory bit all the way into the tool and then back it out slightly before tightening down. This provides plenty of shank for the collet or chuck to hold onto the bit.
* bit diameter inch: 1/2"
* bit diameter mm: 12.7 mm
* grit: 80
* shank diameter: 1/8", 3.2 mm
* Model Number:475
Speed Settings
View Speed Settings

Looking for additional literature?

Request Literature

Contact the Dremel Experts for additional assistance

Phone:

1-800-437-3635

1-262-554-1390

(7am-6pm CT Mon-Fri)

Online:

Submit a question

OTHER PRODUCTS IN THE FAMILY

438
438 1/4" 120-grit Sanding Bands, 6 Pack
432
432 1/2" 120-grit Sanding Bands, 6 Pack
446
446 1/4" 240-grit Sanding Bands, 6 Pack
445
445 1/2" 240-grit Sanding Bands, 6 Pack
431
431 1/4" 60-grit Sanding Bands, 6 Pack
408
408 1/2" 60-grit Sanding Bands, 6 Pack
407
407 1/2" Sanding Drum
430
430 1/4" Sanding Drum

Max Performance Tested program