> 569 1/16" Carbide Grout Removal Bit
569 1/16" Carbide Grout Removal Bit
Ideal for replacing wall and floor grout or removing grout to replace broken tiles.
Email a Friend
Other Products in the family
Easily remove both wall and floor grout Use with Advantage Grout Removal Attachment #962-01
A high-speed cutter with a 1/8" steel shank
30 degree angle for controlled cutting
Guides 180 degrees apart to keep bit centered
Easy screw on mounting
Excellent cutting visibility
For best results, insert the accessory bit all the way into the tool and then back it out slightly before tightening down. This provides plenty of shank for the collet or chuck to hold onto the bit.
Do not run in excess of 18,000 rpm. Therefore, do not use with a Single-Speed MultiPro Rotary Tool unless you use the #221 Foot Speed Control.
bit diameter inch
bit diameter mm
: 1.6 mm
: Carbide Grout Removal Bit
: 1/8", 3.2 mm
View Speed Settings
Looking for additional literature?
Contact the Dremel Experts for additional assistance
(7am-6pm CT Mon-Fri)
Submit a question
OTHER PRODUCTS IN THE FAMILY
560 Drywall Cutting Bit
561 MultiPurpose Cutting Bit
562 Tile Cutting Bit
570 1/8" Carbide Grout Removal Bit
Max Performance Tested program