Service & Repair
To have your Dremel tool serviced or repaired, please contact one of our authorized service centers below. Parts ordering is also available.
- USA Service Centers
- Canadian Service Centers
- Before you Send Us Your Tool
- Returning a Tool for Service
- Repair Time and Charges
- Parts Ordering
USA Service Centers
Dremel Service Center
4915 21st Street
Racine, WI 53406
^ back to top
Our California Service Center has closed
If you are in the US, please forward any tools for warranty evaluation and repair to our Service Center at 4915 21st Street, Racine, WI 53406.
For further information, please call 1-800-437-3635. If returning a tool, please see our instructions for Returning a Tool for Service on this website.
Canada Service Centers
3500 Boul. Matte, Suite 220
Brossard, QC J4Y 2Z2
4008 Myrtie Street
Burnaby, B.C. V5C 4G2
^ back to top
Giles Tool Agencies
47 Granger Avenue Scarborough, Ontario M1K 3K9
Before You Send Us Your Tool
Please check below to see if you can save time and trouble-shoot the tool yourself.
^ back to top
- Issue: The tool runs intermittently.
If your tool is a corded rotary tool, check the brushes first. After 50 to 60 hours of use the carbon motor brushes will likely need to be replaced. Unplug the tool, open the brush caps and remove the carbon brushes from the holders. If there is less than 1/8" of carbon left on either brush, they both should be replaced. Brushes need to be replaced in pairs even if one brush is worn more than the other. Please refer to your owner's manual for more information on motor brushes and replacement instructions.
If you have a cordless rotary tool, be sure the battery is inserted all the way into the tool body and locked into place.
- Issue: The tool does not run at all.
Double check your electrical outlet by plugging a known working item (such as a light or radio) into the outlet to test for electrical service.
- Issue: The tool seems "sluggish" or labors to achieve the desired speed.
Fine particles and sawdust can enter the tool causing it loss of performance. Unplug the tool and "blow out" the tool using dry compressed air to clean out ventilation openings and switch levers of foreign matter. Note: Do not attempt to clean by inserting pointed objects through openings in the tool.
- Issue: Tool will not hold accessory securely in tool.
Determine that the collet matches the shank size of the accessory you are trying to use. Dremel has four different size collets to accommodate different shank sizes. Dremel also offers the Dremel Chuck that allows you to quickly change accessories with different size shanks without the use of any collet.
Returning a Tool for Service
When shipping your corded rotary tool, please package the tool only (not the storage case or accessories). When shipping your cordless tool, please include the tool, battery and charger for a complete system analysis and repair. Package the returned items to protect them in shipment and be sure to include a copy of your dated proof of purchase, a written statement describing the problem you are having and your name, address and daytime telephone number. Dremel recommends that the package be properly insured against loss or accidental damage for which we cannot be responsible.^ back to top
Repair Time and Charges
The following information pertains only to repairs made at the USA Service Centers:
All repairs are performed within two business days of receipt of your tool. If a price quotation is requested on a repair, no action will be taken until authorization is obtained.
Prices stated are the maximum repair charges for non-warranty repairs. If the repair is minor, the charges will be based on time and materials and will result in a lower charge.^ back to top
Please click here for Maximum Repair Charge chart.
Most repair parts can be ordered from the Dremel Service Centers listed. Call the appropriate Service Center for availability and pricing. Be sure to have the model number and type number (usually found on the tool's nameplate) of your tool handy when calling. Please allow 5 to 7 days for delivery. No COD. Please have your credit card handy when calling. Parts prices are subject to change without notice.^ back to top