Cutting

Cut-Off Wheel 32 mm (540)

Cut-Off Wheel 32 mm
Cut-Off Wheel 32 mm
Cut-Off Wheel 32 mm
Cut-Off Wheel 32 mm Cut-Off Wheel 32 mm Cut-Off Wheel 32 mm
For straight cuts in metal

Product description

What can you do with it?
Good for slicing, making straight cuts and slots in all kinds of metal, like hardened steel, sheets metal or aluminum.
Easily cut bolts, or make slots in rusted and/or stripped bolts / screws for removal with a screwdriver.
How to use?
Use with 402 Mandrel: unscrew the top screw on the mandrel using the wrench, put the screw through the middle hole of the disk and screw it back on the mandrel.
If using the metal cutting wheels, cut on high speed – use light pressure. The wheels will last longer and cut faster if light pressure is used rather than heavy pressure and there is less risk of breaking it.
Since these disks are abrasive, the diameter of the wheel is going to wear away. If the wheel becomes too small to execute the cut, stop the cut and replace the wheel.
When using a cut-off wheel, we recommend using a two handed golf like grip to hold and guide the tool and go for a right angle. If you angle the wheel in the cut, the wheel will probably break.
Materials to use on
This cut-off disk can be used on different metal types, like aluminum, copper, cast iron. But also for short cuts in plastic or brick.
On materials like a galvanized metal (Ductwork) or hardened steel, it’s best to use reinforced cut-off wheel (426)
Recommended speed
Aluminium 35000
Brass 35000
Copper 35000
Plastic 10-15000
Steel 35000

Masters all types of applications.

Technical details for Cut-Off Wheel 32 mm (540)

  • Glass fibre reinforced plastics Glass fibre reinforced plastics
  • Brick Brick
  • Marble Marble
  • Drywall/Plasterboard Drywall/Plasterboard
  • Aerated Concrete Aerated Concrete
  • Soft Metal Soft Metal
  • Brass Brass
  • Hardened Steel Hardened Steel
  • Gold Gold
  • Aluminium Aluminium
  • Silver Silver
  • Stainless Steel Stainless Steel
  • Cast iron Cast iron
  • Copper Copper
  • Plastic Plastic
  • Mandrel Mandrel
  • RPM RPM
Technical specifications
Shank diameter
3,2 mm
Working diameter
32,0 mm
Max working depth
14,0 mm
Width
32,0 mm
Maximum RPM
35.000 1/min
Length
32,0 mm
Height
1,0 mm
Package Contents
5 pieces
Suitable Dremel devices
Ordering information
Order number
2615000540
EAN Code
0080596010607
Order number
2615054032
EAN Code
8710364010516

Variations

Click the arrow next to a product variant to see more information and purchase options.

{{ headline }}
{{ content.content }} {{ content.content }}
{{spec.stringText}}
{{spec.stringTitle}}:
{{spec.stringContent}}
{{cat.stringCategoryTitle}}
{{order.stringTitle}}:
{{order.stringContent}}
Delivery details: Cut-Off Wheel 32 mm (540)
Order number:
Product box length, 1 cm
Product box height, 10 cm
Product box width, 5 cm
Order number:
EAN Code
2615000540
0080596010607
Recommended products:
Cutting Set