Sanding
EZ SpeedClic accessories
DREMEL® EZ Lock Abrasive Buffs 180 and 280 Grit (511E)
Sanding
EZ SpeedClic accessories
DREMEL® EZ Lock Abrasive Buffs 180 and 280 Grit (511E)
For cleaning and light sanding of e.g. glass, wood, metal and plastic.
Metal pipes
Steel-general
Sandwich material
Veneered woods
Plastic
Brass
Copper
Soft Metal
Laminates
Softwood
Hardwood
Plywood
Chipboard
Fiberboard
Mandrel
Mandrel
RPM
What can you do with it?
Best for cleaning and light sanding on materials like metal, glass, wood, aluminum and plastics Available in fine, medium and coarse grades. Great to refinish furniture, clean grills, remove paint, tarnish and more
How to use?
When using a 511E or 512E, after turning on the tool, touch the buff LIGHTLY to the material and pass over the area a few times until the material is cleaned up. A lighter touch is the best technique with this accessory. Pushing on the buff will damage it and wear it out more quickly. To extend the life of the 511E, 512E, they should not be be run in excess of 15,000 rpm
Materials to use on and recommended speed
Aluminium 10-15.000 Brass 10-15.000 Copper 10-15.000 Hardwood 10-15.000 Plastic 10-15.000 Softwood 10-15.000 Steel 10-15.000
DREMEL® EZ Lock Abrasive Buffs 180 and 280 Grit (511E)
- For cleaning and light sanding of e.g. glass, wood, metal and plastic.
DREMEL® EZ Lock Abrasive Buffs 180 and 280 Grit (511E)
- For cleaning and light sanding of e.g. glass, wood, metal and plastic.
DREMEL® EZ Lock Abrasive Buffs 180 and 280 Grit (511E)
- Great for detail cleaning and light sanding (Grit 120).
DREMEL® EZ Lock Abrasive Buffs 180 and 280 Grit (511E)
- Great for detail cleaning and light sanding (Grit 36).
Suitable Dremel devices
Retired Products
Ordering information
DREMEL® EZ Lock Abrasive Buffs 180 and 280 Grit (511E)
- Product box length, 3 cm
- Product box height, 10 cm
- Product box width, 5 cm