Wedding Table Numbers: Upcycle Glass Bottles in a Step-by-Step Guide

Table numbers for your wedding
  • Difficulty

Are you looking for creative and budget-friendly DIY wedding decorations? Look no further! In this step-by-step guide, we will show you how to upcycle old glass bottles into stunning table numbers for your wedding reception. With the help of Dremel tools and a little creativity, you can transform simple glass bottles into personalized and elegant table numbers that will impress your guests. Let's dive in and discover how to create unique table numbers for your special day.

You need

Let's go - step by step


Prepare and cut the Bottles

Cut the glass bottle with the Diamond Cutting Wheel SC545DM

You need:


Cleaning and Preparing the Glass Bottles

Start by thoroughly cleaning the glass bottles. Remove any labels and adhesive residue using a cleaning solution or adhesive remover. Rinse the bottles with warm water and let them dry completely.

Marking the Cutting Line

Measure the desired height for your table numbers on the glass bottles. Wrap masking tape around the bottle at this position to avoid the glass from chipping when cutting it later. Use a ruler or measuring tape to mark a straight line around the circumference of each bottle at the chosen height. Ensure that the line is level and even.

Cutting the Glass Bottles

Put on safety goggles and a dust mask for protection. Attach the Diamond cutting wheel DREMEL® MAX LIFE (EZ 545HP) to your DREMEL® 8260 rotary tool. Secure the glass bottle in a stable position using the Dremel ® Multi-Vise (2500), ensuring it won't roll or move during the cutting process.

Turn on your DREMEL® 8260 and gently guide the Diamond cutting wheel along the marked line on the bottle. Apply light pressure and let the tool do the work. Slow and steady movements will result in a cleaner cut. It`s important to cool the bottle with drops of water every 15-20 seconds during the cutting process.


Grind the Glass Cut

Grind the glass bottle using sanding paper and the silicon carbide grinding stone 85422.

You need: Safety Glasses, Dust mask, Safety gloves

Safety Precautions

Before proceeding with glass grinding, it's important to take some safety precautions. Put on safety goggles, a dust mask, and gloves to protect yourself from glass particles. Ensure you're working in a well-ventilated area.

Using the Grinding Stone

Attach the Silicon Carbide Grinding Stone (85422) to your DREMEL® 8260 rotary tool. Hold the tool with a firm grip and gently grind the cut edges of the glass bottles. Move the grinding stone in a circular motion, applying even pressure to smooth out any sharp edges.

Smoothing the Glass Edges

After using the grinding stone, carefully run your fingers along the edges to check for any remaining roughness. If needed, repeat the grinding process until the edges are smooth and safe to touch. If needed, spin the cut side of the bottle in a circular motion on a flat sanding paper to even out and straighten the cut and repeat the application of the grinding stone until you achieve a smooth surface.


Glass numbering

Add a number on the glass bottles with a paint pen.

You need:


Designing the Table Numbers

Now it's time to get creative with your table numbers. Use a white marker or glass paint pen to write the numbers or names on the glass bottles. You can experiment with different fonts and styles to match your wedding theme.

Transferring the Design onto the Glass

If you're not confident in freehand drawing, you can create stencils or print out templates of the table numbers. Place the stencil or template on the glass bottle and trace the design with a pencil. This will help you achieve more precise and consistent lettering.

Applying the Table Numbers

Once you have traced the design, carefully fill in the letters or numbers with the white marker or glass paint pen. Allow the ink or paint to dry completely before handling the glass bottles. If you are keen to bring this DIY to the next level, you may want to consider to engrave the numbers as well. To learn more about engraving with a Dremel tool, check out our How To Get Started with Engraving Guide.


Finishing Touches

Table numbers for your wedding

You need:


Paint or Stain the Wooden Base

Apply a coat of paint or stain to the wooden base, selecting a color that complements your wedding theme. Ensure the paint is dry before proceeding to the next step. Alternatively you can also leave the wood untouched for a more natural look.

Position the Bottle

Place a small, lighted candle inside the bottle. This will create a warm and inviting ambiance.

Arrange the completed bottle table numbers on each wedding table, ensuring they are stable and visible.

Remember, upcycling old glass bottles into wedding table numbers not only adds a touch of creativity to your special day but also promotes sustainability. Congratulations to your wedding and enjoy the process of leting your imagination shine through in preparation to the big day!