Cut-Off Wheel 32 mm (540)

Cutting

Cut-Off Wheel 32 mm (540)

Cutting

Cut-Off Wheel 32 mm (540)

For straight cuts in metal

    See all variations

    Glass fibre reinforced plastics

    Brick

    Marble

    Drywall/Plasterboard

    Aerated Concrete

    Soft Metal

    Brass

    Hardened Steel

    Gold

    Aluminium

    Silver

    Stainless Steel

    Cast iron

    Copper

    Plastic

    Mandrel

    RPM

    Product description

    What can you do with it?

    Good for slicing, making straight cuts and slots in all kinds of metal, like hardened steel, sheets metal or aluminum. Easily cut bolts, or make slots in rusted and/or stripped bolts / screws for removal with a screwdriver.

    How to use?

    Use with 402 Mandrel: unscrew the top screw on the mandrel using the wrench, put the screw through the middle hole of the disk and screw it back on the mandrel.

    If using the metal cutting wheels, cut on high speed – use light pressure. The wheels will last longer and cut faster if light pressure is used rather than heavy pressure and there is less risk of breaking it.

    Since these disks are abrasive, the diameter of the wheel is going to wear away. If the wheel becomes too small to execute the cut, stop the cut and replace the wheel.

    When using a cut-off wheel, we recommend using a two handed golf like grip to hold and guide the tool and go for a right angle. If you angle the wheel in the cut, the wheel will probably break.

    Materials to use on

    This cut-off disk can be used on different metal types, like aluminum, copper, cast iron. But also for short cuts in plastic or brick. On materials like a galvanized metal (Ductwork) or hardened steel, it’s best to use reinforced cut-off wheel (426)

    Recommended speed

    Aluminium 35000 Brass 35000 Copper 35000 Plastic 10-15000 Steel 35000

    Order number
    Working diameter
    Package contents
    2615000540
    32,0 mm
    1 piece
    -

    Cut-Off Wheel 32 mm (540)

    • For straight cuts in metal
    2615000409
    24,0 mm
    1 piece
    -

    Cut-Off Wheel 32 mm (540)

    • For cutting in metals
    2615000420
    24,0 mm
    1 piece
    -

    Cut-Off Wheel 32 mm (540)

    • For tougher cutting in metals, like hardened steel
    2615000426
    32,0 mm
    1 piece
    -

    Cut-Off Wheel 32 mm (540)

    • Reinforced for durability, make cuts in e.g. hardened steel
    Shank diameter
    3,2 mm
    Working diameter
    32,0 mm
    Max working depth
    14,0 mm
    Material
    Rubber reinforced, Aluminum Oxide
    Shape
    Wheel
    Mandrel use
    Use with 402 Screw Mandrel
    Width
    32,0 mm
    Maximum RPM
    35.000 1/min
    Length
    32,0 mm
    Height
    1,0 mm

    Suitable Dremel devices

    Rotary Tools
    DREMEL® 4000 (4000-3/36)
    DREMEL® 200 Series (200-2/30)
    DREMEL® 8220 (8220-1/28)
    DREMEL® 4000 (4000-4/50)
    DREMEL® 3000 (3000-1/26)
    DREMEL® 8260 (8260-5)
    DREMEL® 4250 (4250-35A)
    DREMEL® 8240 (8240-5A)
    DREMEL® 4250 (4250-3/50)
    Retired Products
    DREMEL® 4300 (4300-5/50)

    Ordering information

    EAN Code
    0080596010607
    Order number
    2615000540
    Cut-Off Wheel 32 mm

    Cut-Off Wheel 32 mm (540)

    Delivery details
    • Product box length, 1 cm
    • Product box height, 10 cm
    • Product box width, 5 cm