Tape Application
Warning
Do not drop the build platform. Tempered glass plate may break and result in personal injury. Do not remove tempered glass plate from plasticholder. Contacting with tempered glass plate edge may result in personal injury. Before every build make sure that the build platform is covered with Dremel specified build tape. Use of improper build tape may result in equipment damage and poor object build quality.
Guide
- If build platform is installed, remove by pinching the clip located at the front of the build platform and lifting the build platform off the base, figure 3.
- Remove adhesive liner from Build Tape and place Build Tape over Build Platform. For best results, apply Build Tape at center of Build Platform first and smooth outward to remove any air bubbles, figure 4.
- Install the build platform using the build platform clips.
