Home
Project Plans
Garden Markers

Garden Markers

Dremel plant

Difficulty
Easy

Introduction

Add a personal touch to your garden by engraving your own plant markers.

You need

Step13

Step 1

With the copper pipe clamped into a Dremel Multi-Vise (2500), cut it to size using a mini circular saw

Cut pipe to desired size. Here, we cut our markers to about 4 inches. Tip: Use a vice or hammer to flatten out the top of the copper pipe once you have cut it.

Step23

Step 2

Write the name of the herb, vegetable or plant onto the copper garden markers using a marker pen

Draw on design.

Step33

Step 3

Carve your design into the pipe - Don't cut all the way through the pipe. Working at a low speed, make light strokes across your design. Use rubbing alcohol to remove any remaining design markings. Tip: For added control, use the Detailer's Grip attachment.

Carve your design into the pipe - Don't cut all the way through the pipe. Working at a low speed, make light strokes across your design. Use rubbing alcohol to remove any remaining design markings. Tip: For added control, use the Detailer's Grip attachment.

Tags