Repair Hull Blisters
- DifficultyEasy
Introduction
Some fiberglass fillers can be tinted to a variety of colors. If you tint your filler, you can skip painting your repair in many circumstances. Do not run the brush accessory in excess of 15,000 rpm.
You need
Step14
Step 1
Hull blisters are common on boats. With prompt attention they're not harmful.
Step24
Step 2
Grind out the blister with a 124 high-speed cutter. Recommended speed: 15,000 rpm.
Step34
Step 3
Clean the hole with the 442 carbon steel brush. Wipe away dust with a cloth dipped in paint thinner. Recommended speed: 15,000 rpm.
Step44
Step 4
Finally, fill the hole with fiberglass filler and resin. When dry, scuff the surface before painting.