Rust Removal
  • Difficulty
    Medium

Remove unwanted rust stains from your stone front steps.

You need
Step13

Step 1

practice on a stone

You need:

If you are performing surface preparation with your Ultra-Saw™ tool for the first time, we recommend practicing on a scrap piece of stone. Mount the US410 Diamond Surface Prep Wheel onto your Ultra-Saw. Start the tool and move it in a circular motion making light passes on the stone. Remember to wear a dust mask, gloves, and eye protection when performing surface preparation applications.

Step23

Step 2

Take your time and make very conservative passes when performing surface prep
With Saw Max and US410 make light passes over stone in circular motion
Take your time and make very conservative passes when performing surface prep
With Saw Max and US410 make light passes over stone in circular motion

You need:

Now that you have refined your surface preparation technique with the Ultra-Saw, move onto the area affected by rust. With the US410 wheel still attached, start your Ultra-Saw tool and move it in a circular motion making light passes on the areas stained by rust. Tip: Take your time and make very conservative passes when performing surface preparation applications.

Step33

Step 3

Hose off the steps to remove dust and reveal the newly cleaned steps

You need:

Remove your tool and extension cord from the area. Hose off the steps to remove dust and reveal the newly cleaned steps.