New

Kitchen

Herb Solarium

STEPS

5

SKILL LEVEL

Begin starter plants early this season or keep fresh herbs in your kitchen year-round with this reflective, water-retaining table-top solarium.

by Dremel ®

204 PROJECTS

Supplies Needed For This Project

TOOL

SM20-01 Saw-Max Tool Kit

Model # SM20

TOOL

8220 12VMax High-Performance Cordless

Model # 8220

ACCESSORY

SM510 3" Metal Cut-Off Wheel

Model # SM510

ACCESSORY

EZ409 EZ Lock™ 1-1/2" Thin Cut, Cut-off Wheels (5 Pack)

Model # EZ409

Attachments

A550 Shield Rotary Attachment

Model # A550

Materials

  • 1

    Wooden Tray
  • 1

    Thin Sheet Metal
  • 1

    Small Piece of Wood
  • 1

    Rubber Mallot (if needed)
  • 1

    Measuring Tape
  • 1

    Work Gloves

Let's Get Started

To reduce the risk of injury user must read instruction manuals for all tools used in this project. Wear eye and respiratory protection. Use clamps to support work piece whenever practical.

STEP 1

Step 1

Measure the dimensions of metal you will need to cut: Measure the bottom of the wooden tray, adding 1" in length and width to allow for extra lining up the tray walls.

STEP 2

Step 2

Cut your marked lines using the Dremel Saw-Max and SM510C Metal Cutting Blade. Tip: When cutting metal, wear work gloves and eye protection to avoid injury. Be sure to secure your workpiece to a tabletop with a clamp before cutting.

STEP 3

Step 3

Mark lines in all 4 corners of the sheet metal, 1/2" from the edges and make cuts 1/2" deep. Tip: Use the A550 Shield Attachment for increased comfort from sparks. You still need to wear proper safety gear- work gloves and eye protection.

STEP 4

Step 4

Using the edge of your tabletop as your guide- fold 3 of the 1/2" walls of the lining to your solarium.

STEP 5

Step 5

Lay a small piece of wood inside the lining to help you complete your last fold. Lay your sheet metal lining into a wooden tray. Add terracotta potted plants and water. Tip: Folding a perfect crease may be difficult. Once you have set the metal lining in your tray, you may need to pound into place using a rubber mallot.

Suggested Videos

Rotary Tool - Project

Creating Decorative Eggs

970

Rotary Tool - DIY

Cutting Vinyl Siding

963

Rotary Tool - Project

Cutting Terra Cotta Lumniaries

861

3D Printer - Introduction

Dremel 3D Idea Builder Introduction

857

Other Projects You Might Like

Pallet Planter Box
home decor
Pallet Planter Box

1month ago

Upcycled Picnic Table
lawn & garden
Upcycled Picnic Table

1month ago

Terrarium
home decor
Terrarium

1month ago

Candle Holder Center Piece
home decor
Candle Holder Center Piece

1month ago

No Promotion available!

A TOOL THAT CAN DO IT ALL

Experience Dremel's most powerful oscillating tool. Featuring 7.0 amps of power and 2 new, powerful cutting blades, the Dremel Velocity is the only tool you need.

No Promotion available!

TOUR THE MAKER GALLERY

Explore the creations added to the Maker Gallery by Dremel Makers.

Comments(0)

Sign In to post comments on this project.

No comments yet.

No Promotion available!

Dremel Experts

From drilling holes to distressing denim, Dremel’s Customer Service has an answer.