by Dremel ®
Let's Get Started
To reduce the risk of injury user must read instruction manuals for all tools used in this project. Wear eye and respiratory protection. Use clamps to support work piece whenever practical.
Begin by laying out your design on your craft wood material. You can either trace a design or adhere it in place with spray glue as we did with the tree stencil (provided in this project).
Using your Moto-Saw and the Side Cutting Blade, cut along your template. You may find it easier to clamp your plywood to your workbench and cut the piece using the Moto-Saw in the handheld position. Run your tool at a speed setting of 6 for this application. Tip: Remember to let the speed of the tool do the work and do not force the blade through the plywood.
Add any finishing touches and paint as desired. Use a hoe or a shovel to create a divot for your stake and plant it firmly into place.
TOUR THE MAKER GALLERY
Explore the creations added to the Maker Gallery by Dremel Makers.
A TOOL THAT CAN DO IT ALL
Experience Dremel's most powerful oscillating tool. Featuring 7.0 amps of power and 2 new, powerful cutting blades, the Dremel Velocity is the only tool you need.