New

Organizational

Drawer Organizers

STEPS

6

SKILL LEVEL

Keep your kitchen and desk drawers organized by building your own customized dividers. You will need a Dremel Multi-Saw to cut the partition pieces, and a Dremel 3D Idea Builder to print your own fasteners.

by Dremel ®

147 PROJECTS

Supplies Needed For This Project

TOOL

3D Idea Builder™

Model # 3D20-01

TOOL

SM20-01 Saw-Max Tool Kit

Model # SM20

TOOL

Multi-Max™ MM20

Model # MM20

ACCESSORY

SM500 Wood & Plastic Carbide Wheel

Model # SM500

ACCESSORY

60, 120 and 240 Grit Sand Paper - Wood

Model # MM70W

Let's Get Started

To reduce the risk of injury user must read instruction manuals for all tools used in this project. Wear eye and respiratory protection. Use clamps to support work piece whenever practical.

STEP 1

Step 1

First, to determine the number of fasteners needed, decide on the design of the drawer. Print out the necessary pieces by going to Dremel3D.com to download the models titled Drawer Organizers. For our drawer pattern, we printed (5) #1261 (.25 straight), (1) #1262 and (1) #1329.

STEP 2

Step 2

Measure the interior dimensions of your drawer to prepare for your dividers. Then, measure and cut the Masonite wood, 1/4" shorter than the length of your drawer, with a Dremel Multi-Saw and wood cutting accessory. The 3D printed pieces will make-up the extra 1/4 inch.

STEP 3

Step 3

Next, using your Dremel Multi-Max and sanding accessory, sand the wood to smooth any rough edges and surfaces.

STEP 4

Step 4

Once the dividers are sanded, test that the pieces fit by inserting them into the drawer with the 3D printed pieces attached. If necessary, adjust the pieces accordingly.

STEP 5

Step 5

Once you are satisfied with the location of the dividers, mark with a pencil where the 3D printed pieces will be glued to.

STEP 6

Step 6

Now reassemble the drawer dividers. Glue the 3D pieces to the drawer where you previously marked with a pencil in step 6. Once the 3D pieces are stuck to the drawer and dry, glue the dividers into place on the drawers. Once dry, you are ready to organize the drawers!

Suggested Videos

Rotary Tool - DIY

Cutting Vinyl Siding

932

Rotary Tool - Project

Creating Decorative Eggs

926

Rotary Tool - Project

Cutting Terra Cotta Lumniaries

841

3D Printer - Introduction

Dremel 3D Idea Builder Introduction

829

Other Projects You Might Like

Etched Candle
home decor
Etched Candle

5months ago

Light-up Headboard
furniture
Light-up Headboard

1year ago

Upcycled Picnic Table
lawn & garden
Upcycled Picnic Table

1year ago

Tape Dispenser
organizational
Tape Dispenser

1month ago

No Promotion available!

TOUR THE MAKER GALLERY

Explore the creations added to the Maker Gallery by Dremel Makers.

No Promotion available!

SHOW US WHAT YOU MADE

Send us a photo of your Dremel creation so we can share it with the world.