New

Home Decor

Wall Mount Marble Track

STEPS

4

SKILL LEVEL

Create this fun and educational Rube Goldberg Wall Mount Marble Track!

by Dremel ®

204 PROJECTS

Supplies Needed For This Project

TOOL

Multi-Max™ MM30

Model # MM30

TOOL

US40 Ultra-Saw™

Model # US40

ACCESSORY

MM14U Hook and Loop Pad

Model # MM14U

ACCESSORY

60, 120 and 240 Grit Sand Paper - Wood

Model # MM70W

ACCESSORY

US500-01 4” Carbide Wood Cutting Wheel

Model # US500-01

Materials

  • 1

    24" x 24" - 3/4" Luan Plywood
  • 1

    10 ft - 1/2" x 1" Poplar Stock
  • 1

    12" x 24" - 1/4" Masonite Sheetin
  • 1

    Glue
  • 1

    Nails/Screws
  • 1

    Tape Measure & Pencil

Let's Get Started

To reduce the risk of injury user must read instruction manuals for all tools used in this project. Wear eye and respiratory protection. Use clamps to support work piece whenever practical.

STEP 1

Step 1

To begin your project, cut plywood for the marble track back to 20" x 22" using your Dremel Ultra-Saw and smooth the edges & corners with your Dremel Multi-Max.

STEP 2

Step 2

Next, cut your Poplar for the marble track to the following lengths and quantities: • 1 - 22" inches long • 2 - 18" • 2 - 14" • 1 - 13" (catch basin) • 2 - 9" • 1 - 6" • 3 - 4" Then, rip Masonite in 1" strips & cut to the length of the Poplar strips you just made. Measure & cut Poplar "stops" for the channel & basin ends. Next, assemble the masonite sides to the poplar base and add the poplar stop to one end as shown using wood glue.

STEP 3

Step 3

Layout assembled channels & catch basin.

STEP 4

Step 4

Next, you can paint/finish your plywood back, we painted ours red(optional). Then, create your pattern for the run. You can use ours as a template or make your own. Secure the channels & catch basin to the plywood. We used a combination of glue for some & nails/screws (from the back) for others. This allowed us to make adjustments for ball speed. Hang on the wall and enjoy.

Suggested Videos

Rotary Tool - Project

Creating Decorative Eggs

970

Rotary Tool - DIY

Cutting Vinyl Siding

963

Rotary Tool - Project

Cutting Terra Cotta Lumniaries

861

3D Printer - Introduction

Dremel 3D Idea Builder Introduction

857

Other Projects You Might Like

Patio Bench
furniture
Patio Bench

3months ago

Rust Removal
home repair
Rust Removal

3months ago

Garage Wire Shelving
organizational
Garage Wire Shelving

2months ago

Upcycled Window Table
furniture
Upcycled Window Table

2months ago

No Promotion available!

TOUR THE MAKER GALLERY

Explore the creations added to the Maker Gallery by Dremel Makers.

No Promotion available!

SHOW US WHAT YOU MADE

Send us a photo of your Dremel creation so we can share it with the world.

Comments(0)

Sign In to post comments on this project.

No comments yet.

No Promotion available!

Dremel Experts

From drilling holes to distressing denim, Dremel’s Customer Service has an answer.