New

Kitchen

Pot Hanger

STEPS

3

SKILL LEVEL

Save some space in your kitchen. Create a unique and stylish pot and pan hanger from an old window frame.

by Dremel ®

205 PROJECTS

Supplies Needed For This Project

TOOL

Multi-Max™ MM20

Model # MM20

TOOL

4000 High Performance Rotary Tool

Model # 4000

ACCESSORY

MM452 Wood/Drywall and Metal Saw Blade

Model # MM452

ACCESSORY

60, 120 and 240 Grit Sand Paper - Wood

Model # MM70W

Materials

  • 1

    Old Window
  • 1

    Paint
  • 12

    Screw Hooks
  • 1

    Chain or Galvanized Cable

Let's Get Started

To reduce the risk of injury user must read instruction manuals for all tools used in this project. Wear eye and respiratory protection. Use clamps to support work piece whenever practical.

STEP 1

Step 1

Remove glazing on long, straight areas of the window using the Dremel Multi-Max with the MM452 blade. To remove glazing in curved or tight spaces, use a Dremel Rotary Tool with the 115 high-speed cutter. Once glazing is removed, you can either re-glaze or remove the pane of glass altogether. Tip: Work with both tools at a medium speed. If you chose to remove the pane of glass, be careful to watch out for any existing nailing holding the pane into place- as they can be sharp. Wear gloves when working on this project.

STEP 2

Step 2

Remove paint on flat expanses of the window using the Dremel Multi-Max with the MM70P Sanding Sheet. Use a rotary tool equiped with a Flapwheel sanding accessory to remove paint in areas that are more difficult to access.

STEP 3

Step 3

Paint the sanded frame. Once the paint is dry, drill pilot holes into the frame in areas where you would like to hang your pots. Finger-tighten screw hooks into your piloted holes. Tip: You can stand the frame upright on your counter, mount it to a wall, or hang it from the ceiling. Here, we hung the window using a galvanized cable looped around screw hooks fixed to each corner of the window frame.

Suggested Videos

Rotary Tool - Project

Creating Decorative Eggs

970

Rotary Tool - DIY

Cutting Vinyl Siding

963

Rotary Tool - Project

Cutting Terra Cotta Lumniaries

861

3D Printer - Introduction

Dremel 3D Idea Builder Introduction

857

Other Projects You Might Like

Holiday Mantel Hooks
seasonal
Holiday Mantel Hooks

4months ago

Recessed Lighting
kitchen
Recessed Lighting

4months ago

Holiday Nutcracker
seasonal
Holiday Nutcracker

2weeks ago

Chalkboard Lost & Found
organizational
Chalkboard Lost & Found

4months ago

No Promotion available!

SHOW US WHAT YOU MADE

Send us a photo of your Dremel creation so we can share it with the world.

No Promotion available!

A TOOL THAT CAN DO IT ALL

Experience Dremel's most powerful oscillating tool. Featuring 7.0 amps of power and 2 new, powerful cutting blades, the Dremel Velocity is the only tool you need.

Comments(0)

Sign In to post comments on this project.

No comments yet.

No Promotion available!

Dremel Experts

From drilling holes to distressing denim, Dremel’s Customer Service has an answer.