Cut-Off Wheel 24 mm (409)
For cutting in metals
£10.00* RRP incl. VAT
What can you do with it?
Good for slicing, making straight cuts and slots in all kinds of metal, like hardened steel, sheets metal or aluminum. Easily cut bolts, or make slots in rusted and/or stripped bolts / screws for removal with a screwdriver.
How to use?
Use with 402 Mandrel: unscrew the top screw on the mandrel using the wrench, put the screw through the middle hole of the disk and screw it back on the mandrel.
If using the metal cutting wheels, cut on high speed – use light pressure. The wheels will last longer and cut faster if light pressure is used rather than heavy pressure and there is less risk of breaking it.
Since these disks are abrasive, the diameter of the wheel is going to wear away. If the wheel becomes too small to execute the cut, stop the cut and replace the wheel.
When using a cut-off wheel, we recommend using a two handed golf like grip to hold and guide the tool and go for a right angle. If you angle the wheel in the cut, the wheel will probably break.
Materials to use on
This cut-off disk can be used on different metal types, like aluminum, copper, cast iron. But also for short cuts in plastic or brick.
On materials like a galvanized metal (Ductwork) or hardened steel, it’s best to use reinforced cut-off wheel (426)
Technical details for Cut-Off Wheel 24 mm (409)
- Glass fibre reinforced plastics
- Aerated Concrete
- Soft Metal
- Hardened Steel
- Stainless Steel
- Cast iron
Max working depth
Click the arrow next to a product variant to see more information and purchase options.
Similar Accessories (2)
Delivery details: Cut-Off Wheel 24 mm (409)
Product box length, 1 cm
Product box height, 10 cm
Product box width, 5 cm
£18.00* RRP incl. VAT