Spiral Cutting Bits Multipurpose (561)

£11.70*RRP incl. VAT


Spiral Cutting Bits Multipurpose (561)


Spiral Cutting Bits Multipurpose (561)

For 'free' cutting in softer materials like soft wood, drywall and plastics

    See all variations
    RRP incl. VAT



    Veneered woods


    Soft Metal






    What can you do with it?

    Best for cutting and drilling in soft materials such as soft woods (less than 12mm thick) and plastics. Great to go freehand to create the shapes you like.

    How to use?

    We recommend to use this bit with the Dremel Multipurpose Cutting Attachment, because it’s designed to help you maintain depth during the application. It’s important that the depth of the guide supports the cutting blade extending beyond the material by about 0.6 cm. (.25”). If the bit extends out too far beyond the material, it can be more difficult to control and can actually snap the bit.

    Best control of the bit occurs when moving in a clockwise direction. Begin the cut at a 45 degree angle and then bring the accessory to 90 degrees.

    The tool should be set at a high speed, the feed rate of the material or the tool through the material should be slow and gradual. Too much pressure will cause this accessory to get “red hot.”

    Using the tip of the bit is not the best way to cut – we recommend using the sides of the bit, where the full cutting capacity of the fluting can be put to use.

    Materials to use on

    Soft materials like soft woods (less than 12mm thick), plastics, glass fibers and thin foils of aluminum.

    Recommended speed

    Aluminum 20.000 – 35.000 RPM Hardwood 20.000 – 35.000 RPM Softwood 20.000 – 35.000 RPM Plastic 10.000-15.000RPM

    Order number
    Working diameter
    Package contents
    3,2 mm
    1 piece

    Spiral Cutting Bits Multipurpose (561)

    • For 'free' cutting in softer materials like soft wood, drywall and plastics
    3,2 mm
    1 piece

    Spiral Cutting Bits Multipurpose (561)

    • For 'free' cutting in wall tiles (not floor tiles)
    1 piece

    Spiral Cutting Bits Multipurpose (561)

    • Make controlled cuts in any shape in wall tiles
    Shank diameter
    3,2 mm
    Working diameter
    3,2 mm
    Working length
    30 mm
    Accessory length
    65,0 mm
    High Speed Steel
    Mandrel use
    No Mandrel Needed
    3,0 mm
    Maximum RPM
    35.000 1/min
    3,0 mm
    62,0 mm

    Suitable Dremel devices

    Retired Products
    DREMEL® 3000 Multitool Project-Kit (3000-4/45)
    DREMEL® 7700 (7700-30)
    DREMEL® 4000 (4000-4/65)
    DREMEL® 3000 (3000-1/25 Hobby)
    DREMEL® 8100 (8100-1/15)
    DREMEL® 4000 (4000-4/65 EZ)
    DREMEL® 4200 (4200-4/75 EZ)
    DREMEL® 8200 (8200-1/35)
    DREMEL® 7700 (7700-15 Hobby)
    DREMEL® 4200 (4200-4/75)
    DREMEL® 200 Series (200-5)
    DREMEL® 4000 (4000-1/45)
    DREMEL® 8200 (8200-2/45)
    DREMEL® 4300 (4300-3/45EZ)
    DREMEL® Micro (8050-15)
    DREMEL® Micro (8050-35)
    DREMEL® 8220 (8220-5/65)
    DREMEL® 8220 (8220-1/5)
    DREMEL® 8220 (8220-2/45)
    DREMEL® 3000 (3000-15)
    DREMEL® 3000 (3000-1/25 EZ)
    DREMEL® 3000 (3000-2/25)
    DREMEL® 8240 (8240-5)
    DREMEL® 8240 (8240-5/65)
    DREMEL® 4250 (4250-3/45)
    DREMEL® 8260 (8260-5/65)
    DREMEL® 8260 (8260-5)
    DREMEL® 8240 (8240-3/45)
    DREMEL® 8240 (8240-3/45)

    Ordering information

    EAN Code
    Order number
    Spiral Cutting Bits Multipurpose

    Spiral Cutting Bits Multipurpose (561)

    Delivery details
    • Product box length, 1.5 cm
    • Product box height, 10 cm
    • Product box width, 5 cm