Sanding

DREMEL® MAX 408DM sanding band and hole drill (408DM)

NEW
DREMEL® MAX 408DM sanding band and hole drill
DREMEL® MAX 408DM sanding band and hole drill
DREMEL® MAX 408DM sanding band and hole drill DREMEL® MAX 408DM sanding band and hole drill
Sanding hard & soft woods, composites, fiberglass, Masonite boards, rigid foam, and more. Drilling soft wood and ceramic wall tile.
  • 30 times longer life compared to standard Dremel sanding band (408).
  • Carbide coating provides added durability to the surface of the drum and will not tear loose like other ordinary sanding bands.
  • Functions as both a sanding drum and a hole drill capable of plunge cutting into a variety of materials.
  • Mounted on an extra strong steel mandrel.

Product description

Sanding- What can you do with it?
Mounted on an extra strong, steel mandrel the sanding drum allows you to move laterally or orbitally to smooth out surfaces, enlarge holes, or create irregular cavities.

How to use?
Drum is most effective when the edge is flat against the work piece. To find optimal speed, start slowly and gradually increase speed in order to avoid excessive heat. Let the tool do the work with reduced speed and apply little to no pressure in order to maximize accessory life. Not recommended for usage with metal or substances such as paint & other finishes as drum will be clogged easily.
Materials to use on
Ideal for a variety of materials including
Hard and soft woods
Ceramic wall tile
Composites
Plastic
Fiberglass
Stone
Not recommended for use on metal
Sanding Recommended speed
Soft & Hard Wood 15000 - 35000 RPM
Laminates/Plastics 15000 RPM
Shell/Stone 25000 – 35000 RPM
Ceramic 15000 RPM
Hole Drill - What can you do with it?
This accessory functions as both a sanding drum and a hole drill. With hole drill function you can plunge cut into a variety of materials.
How to use?
Start drilling by holding your tool on a 45 degree angle. Continue cutting, moving the tool in circular motion. Allow the tool to cut the whole gradually. This way you will build minimum heat around the accessory and maximize the accessory life.
When drilling holes through ceramic wall tile, start hole on the non-glazed side of the tile.
To remove a material plug stuck in the hole saw, fasten a screw into the plug and pull it out or lightly tap the plug with a punch until it breaks.
Materials to use on
Ideal for soft woods and ceramic wall tile.
Not recommended for stone, porcelain, or hard floor tiles.
Hole drill - Recommended speed
Soft & Hard Wood 20000 RPM
Laminates/Plastics 15000 RPM
Ceramic 15000 – 20000 RPM

Example of usage

Technical details for DREMEL® MAX 408DM sanding band and hole drill (408DM)

Technical specifications
Shank diameter
3,2 mm
Working diameter
13,0 mm
Working height
13,0 mm
Working length
13,0 mm
Grit
60
Maximum RPM
35.000 1/min
Package Contents
1 piece

Variations

Click the arrow next to a product variant to see more information and purchase options.

{{ headline }}
{{ content.content }} {{ content.content }}
{{spec.stringText}}
{{spec.stringTitle}}:
{{spec.stringContent}}
{{cat.stringCategoryTitle}}
{{order.stringTitle}}:
{{order.stringContent}}
Delivery details: DREMEL® MAX 408DM sanding band and hole drill (408DM)
Order number
1x 408DM sanding band/hole drill
Order number
EAN-Code
26150408DM
4053423238716