How to Fix Lid Switch Error

1) Check if Your Lid is Open

If your lid is open, the switches will not be triggered.

2) Check if Your Laser Cutter is on an Uneven Surface

If your surface isn’t level, one or both of the lid switches might not be activated.

3) Check the Small Sponges on your Laser Lid

If they are cracked, damaged, or worn down, they might not be triggering the lid switches.

4) Faulty Sensors need Repair

If none of the previous solutions fix the error, and physically pressing both sides of the lid down so the switches are activated does not turn the icon white, then one or both of your lid switches are damaged/faulty and your laser needs to be serviced.