Basketball Backboard

This week, score a 3 point shot with this easy and fun DIY Basketball Hoop!
  • Difficulty
    Medium

Introduction

This week, score a 3 point shot with this easy and fun DIY Basketball Hoop!

You need
Step14

Step 1

boards

You need:

Source your reclaimed wood, basketball hoop and plywood. Use a Dremel Ultra-Saw™ to cut the plywood proportionately. Then, use the Dremel Multi-Max to sand the edges of the cut wood. Hint: Cut out the plywood backing 3” smaller than the reclaimed surface area to give you a nicer edge.

Step24

Step 2

backboard

You need:

Next, secure the plywood backing to reclaimed wood using the hammer and nails.

Step34

Step 3

installation of hoop

You need:

Screw the hoop to front of the reclaimed wood, and add the net to the hoop.

Step44

Step 4

adding hook in back

You need:

Then, screw the mounting hooks to the back of the hoop, which is now ready to be mounted to the wall.


Warning

To reduce the risk of injury user must read instruction manuals for all tools used in this project. Wear eye and respiratory protection. Use clamps to support work piece whenever practical.