Terracotta Painted Pots
You need
Step By Step Instructions
Step14
You need:
Paint the pot with the paint, using two coats of paint if necessary, and leave to dry completely.
Step24
You need:
Draw your design onto the pot using the pencil. Try to keep the lines quite faint. Use an eraser to remove any mistakes.
Step34
You need:
Follow the pencil lines on the pot using the Dremel 300 Series with a diamond wheel point 7105. It is a good idea to practise on a spare pot (or use the base) before you start the final design. Brush off any dust with a soft, dry paintbrush.
Step44
You need:
Finished Project
Warning
To reduce the risk of injury user must read instruction manuals for all tools used in this project. Wear eye and respiratory protection. Use clamps to support work piece whenever practical.