For optimal control and precision in various applications, the Dremel 4000 offers two recommended grips: the "Golf Grip" and the "Pencil Grip."

Golf Grip: Use the "Golf Grip" for more aggressive tasks such as grinding and using cutoff wheels. Place the tool in the palm of your hand, wrap your fingers around the body of the tool, avoiding the exhaust vents. Rest your thumb on the power switch for easy operation.

Pencil Grip: For detailed work, hold the rotary tool like a pencil between your thumb and forefinger. Still need more control and precision? Use our Detailers Grip or Flex Shaft attachments with your Dremel Rotary Tool for extra accuracy

Installing accessories on your Dremel 4000 is a breeze, thanks to the EZ Twist™  nose cap and the included wrench. This versatile tool offers two methods for accessory installation, providing you with flexibility and convenience. Here's how to do it:

1. EZ-Twist Nose Cap: The EZ-Twist nose cap simplifies accessory changes without requiring a separate wrench. Start by loosening the collet. Hold down the shaft lock button and rotate the collet counterclockwise. Ensure that the nose cap is clear of the tool's threads. Align the internal wrench with the collet nut and turn counterclockwise to loosen the collet. Finish loosening with your fingers. Next, install your accessory, leaving a gap of less than ¼" between the accessory and the collet nut. Tighten the collet by hand while holding the shaft lock button and use the EZ-Twist nose cap for the final snug fit.

2. Included Wrench: In some cases, when using attachments, you may need to use the included wrench instead of the EZ-Twist nose cap to secure your accessory.

The Dremel 4000 and supplied 1/8” collet is compatible with all 1/8” shank accessories. The majority of our current portfolio for high-speed rotary tools are sized to 1/8” and smaller shank accessories require additional purchase of the 4485 Collet Nut Kit, a set of collets of varying sizes for your rotary tool or the 4486 keyless chuck, an adjustable chuck allowing you to use any size shank accessory with your rotary tool. If you're not using the 4486 keyless chuck (sold separately), ensure you select the collet that matches your accessory's shank size.  

1. Verify the collet is present at the end of the tool. Hold down the shaft lock button and unthread the collet nut. If the collet is stuck in the collet nut, you'll notice a silver sleeve within the threaded end of the collet nut.
2. To release the collet, insert the shank end of the accessory into the silver sleeve. If that doesn't work, use the pointed end of a pencil to push the collet out of the nut.

Unthread the housing cap from the end of the tool, and then thread the Cutting Guide onto the tool in place of the housing cap. For more details, watch our getting started video.

The Cutting Guide Attachment is designed to help you maintain depth while using Dremel spiral saw cutting accessories like the 560 (drywall), 561 (Multipurpose), and 562 (ceramic wall tile).

In most cases, it's best to cut in a clockwise direction with any spiral saw, unless you're cutting out for an electrical box in drywall. In such cases, use a counterclockwise direction with the Drywall (Guidepoint) bit, which features a guidepoint to navigate around the electrical box.

To attach the A576 Sanding/Grinding Guide, first, remove the nose cap from your compatible tool and loosen the collet nut with an EZ-Twist nose cap or the included wrench. Insert your compatible accessory into the tool's collet and tighten it with the provided wrench. Thread the A576 attachment onto the tool's housing collar and adjust the depth using the wing nut. For a visual guide, watch our getting started video.

The A576 Sanding/Grinding Guide Attachment is compatible with sanding and grinding accessories up to ½" in diameter. Experiment with different projects, starting with the 408-sanding band & mandrel for sanding. Finish with lower grit bands like 432 (120 grit) or 445 (240 grit). This attachment also helps when sharpening garden tools with the 932 grinding stone, ensuring the proper angle is maintained.

Install your ½” diameter or smaller sanding and grinding accessory before attaching the A576 Sanding/Grinding Guide. Once the attachment is on the tool, you won't be able to change accessories. If you need to switch applications, unscrew the A576 attachment and replace the accessory to meet your new needs

The Dremel 4000 offers variable speed options, allowing you to adapt to the specific requirements of your project. Speed selection can be guided by the sound and feel of the tool, but for precise applications, consult the owner's manual's speed chart, indicating speeds ranging from 5,000 to 35,000 RPM. Detailed recommendations for accessory and material combinations can be found in the kit contents breakdown.The Dremel 4000 offers variable speed options, allowing you to adapt to the specific requirements of your project. Speed selection can be guided by the sound and feel of the tool, but for precise applications, consult the owner's manual's speed chart, indicating speeds ranging from 5,000 to 35,000 RPM. Detailed recommendations for accessory and material combinations can be found in the kit contents breakdown.

In most cases, it's advisable to place the accessory before attaching the accessory. This is especially true when the attachment goes over the collet nut or chuck, making it inaccessible once the attachment is in place. Examples include the Shaper Router Table and depth-managing guides like the Cutting Guide or Circle Guide.

The Dremel 4000 features replaceable motor brushes to maintain peak efficiency. Typically, these brushes last between 50 and 100 hours, depending on your usage. For more aggressive applications, you may need to replace them more frequently. We recommend checking the brushes every 30 hours. To check the brushes, use the flat end of the included wrench to unscrew the plastic piece near the DREMEL label. If the carbon piece is shorter than 1/8”, both brushes should be replaced. Replacing brushes is essential to prevent tool damage. After replacement, run the tool with no load for 5 to 10 minutes to seat the new brushes. Replacement brushes are available by calling 1.800.437.3635.