DREMEL® Glass Drilling Bit (662)

Drilling

DREMEL® Glass Drilling Bit (662)

Drilling

DREMEL® Glass Drilling Bit (662)

Thinnest glass drilling bit to be used on straight or curved material

    Glass

    RPM

    What can you do with it?

    Ideal for drilling holes in both flat and contoured surfaces like glass or ceramic wall. Diamond grit is a full 360-degrees around the circumference of the bit which allows it to be used in a rasping action to enlarge a hole if needed. Holes on the side of the bit allow the removal of material. Ideal for decorative projects including glass blocks or bottles.

    Is ideal for drilling holes in both flat and contoured surfaces e.g. glass or ceramic wall. Diamond grit is a full 360-degrees around the circumference of the bit which allows it to be used in a rasping action to enlarge a hole if needed.

    How to use?

    When cutting a hole, ensure your work piece is well secured and do not apply excessive pressure to avoid cracking the glass. Apply cooling liquid or water to the material. Hold your tool at a 45 degree angle to go into the material. Then gradually lift your tool up to make a 90 degree drill. Apply drops of water / cooling liquid to the work piece for a clean drill operation. You can take the accessory out of the material to apply water or cooling liquid. Use with cordless tools only.

    Materials to use on

    Suitable for use on glass, ceramic wall tile, glass block, glass bottles, jewelry - flat or contoured surfaces.

    Recommended speed
    10.000-15.000 RPM
    Shank diameter
    3,2 mm
    Working diameter
    3,2 mm
    Working length
    5,0 mm
    Accessory length
    44,0 mm
    Material
    Carbon Steel with Diamond Coating
    Mandrel use
    No Mandrel Needed
    Width
    3,0 mm
    Length
    3,0 mm
    Height
    45,0 mm

    Suitable Dremel devices

    Retired Products
    DREMEL® 3000 Multitool Project-Kit (3000-4/45)
    DREMEL® 7700 (7700-30)
    DREMEL® 4000 (4000-4/65)
    DREMEL® 3000 (3000-1/25 Hobby)
    DREMEL® 8100 (8100-1/15)
    DREMEL® 4000 (4000-4/65 EZ)
    DREMEL® 4200 (4200-4/75 EZ)
    DREMEL® 8200 (8200-1/35)
    DREMEL® 7700 (7700-15 Hobby)
    DREMEL® 4200 (4200-4/75)
    DREMEL® 200 Series (200-5)
    DREMEL® 4000 (4000-1/45)
    DREMEL® 8200 (8200-2/45)
    DREMEL® 3000 (3000-2/45)
    DREMEL® 3000 (3000-10X)
    DREMEL® 4300 (4300-3/45EZ)
    DREMEL® Micro (8050-15)
    DREMEL® Micro (8050-35)
    Multi-Tools
    DREMEL® 8220 (8220-5/65)
    DREMEL® 8220 (8220-1/5)
    DREMEL® 8220 (8220-2/45)
    DREMEL® 3000 (3000-15)
    DREMEL® 3000 (3000-5)
    DREMEL® 3000 (3000-1/25 EZ)
    DREMEL® 3000 (3000-2/25)
    DREMEL® 8240 (8240-5)
    DREMEL® 8240 (8240-5/65)
    DREMEL® 4250 (4250-3/45)
    DREMEL® 8260 (8260-5/65)
    DREMEL® 8260 (8260-5)
    DREMEL® 8240 (8240-3/45)
    DREMEL® 8240 (8240-3/45)

    Ordering information

    EAN Code
    8710364080380
    Order number
    26150662JB
    DREMEL® Glass Drilling Bit

    DREMEL® Glass Drilling Bit (662)

    Delivery details
    • The Dremel Glass Drilling Bit 662 is ideal for cutting holes in glass. You can drill perfect 3.2mm diameter holes. To be used with DREMEL cordless tools.
    • Product box length, 3.6 cm
    • Product box height, 10 cm
    • Product box width, 5 cm