Intelligent Dog Toy

How to create an intelligent dog toy

    Clever dogs enjoy the inspiration of intelligent dog toys. A creative idea you can make yourself by using Dremel® tools is a toy with a drawer and pull cord. Fill the drawer with a home-baked dog biscuit and you have the perfect, interactive dog toy for your four-legged darling. Simply pull the cord, find the treat, devour it and if you're a really clever dog close the drawer again. Woof woof!

    You need
    Step16

    Glue together plywood sheets with Dremel Glue Gun to make a drawer

    Have ten birch plywood sheets for the drawer and box cut to the correct size at the DIY store (see below for dimensions). A handy Dremel® Glue Gun 930 is used to stick the parts together to make a drawer open at the top and a fitting box that is open at the front.

    Step26

    Use a Dremel 3000 to sand the edges cleanly and carefully

    As soon as the boxes are dry, the Dremel® 3000 comes into play. It is used to sand the edges cleanly and carefully.

    Step36

    Use a ruler to mark two spots in the middle for the pull handle

    Now it is the drawer's turn. Use a ruler to mark two spots in the middle, 10 cm apart. That is where the cord pull handle will be fitted.

    Step46

    Using a rope, knot each end and screw to the marked spots

    To make the drawer handle, knot both ends of a piece of rope about 25 cm long. Then screw each knot to one of the marked spots, ideally so that the ends of the screws peek out on the other side of the plywood.

    Step56

    Using a Dremel 3000 cut the screw ends with cutting wheel SC456

    The Dremel® 3000 can be used to cut off the protruding screw ends on the inside of the drawer easily and cleanly by means of the EZ SpeedClic metal cutting wheel SC456.

    Step66

    Paint the outer box in your own design

    Nearly done now: just paint the outer box in your own design, for example with environmentally friendly acrylic paint, and your dog can start playing with this enticing box.