Apply self-adhesive copper tape around the edges of +/- forty 20 x 1/2" mosaic tiles (for a 1.2" carver plate). Then apply two strips of copper tape around the edge of the carver plate, spacing them 4/5" apart. Burnish the tape smooth using a bone folder or the back of a teaspoon. Glue the mosaics around the plate so that the top and bottom edges touch the tapes, spacing the mosaics randomly as shown.
Then, using the Versaflame and soldering tip, solder around the individual pieces of mosaic, and around the rim twice to cover the copper tape.
Then, take your Dremel Engraver and engrave lines in between the mosaic tiles, containing them within the border and positioning them randomly as shown.