Etched Juice Pitcher

Missing image

  • Difficulty

Nothing screams “Spring” like brunch! Host a party and serve juice in a glass pitcher with an etched design on it.

You need
  • No tools needed
  • Scissors
  • Pattern
  • Pitcher
  • Tape
L: Length, W: Width, H: Height, D: Diameter
Step 1 3

Step 1

Missing image

First, source the pattern you want etched onto the pitcher by drawing a design yourself or printing from the internet. Cut it out so it will easily fit in the pitcher.

Step 2 3

Step 2

Missing image

Situate the pattern inside the pitcher so the design is in the final location where you will etch it with the Dremel Micro. Secure the pattern with tape.

Step 3 3

Step 3

Missing image

Lastly, with the Micro and the Diamond Wheel Point, follow the pattern until the design is fully transferred to the pitcher. Wash the pitcher carefully, fill with orange juice and it is ready to serve for brunch!


To reduce the risk of injury user must read instruction manuals for all tools used in this project. Wear eye and respiratory protection. Use clamps to support work piece whenever practical.