Stylish Bookshelf

How to design and make a stylish bookshelf

    Have you run out of room for your favorite books or a decorative vase of flowers in your home? Shelves create space for things you have grown fond of and make the wall more distinctive. Let us show you how to design and make a stylish bookshelf out of wood and metal simply and fast, in just a few steps, with the right Dremel® tool. It will be a highlight in every living room, study and reading corner.

    You need

    Step By Step Instructions

    Step16

    Draw the measurements onto wooden board and metal

    Have a wooden board cut to size - 6.5' x 8" x 3/4" - in your DIY superstore and buy a 8" x 14" x 1 mm sheet of metal. Transfer the parts for your shelf from the construction plan to the wooden board and the sheet of metal.

    Step26

    Using Dremel DSM20 and DSM500 cut the wood and DSM510 for metal

    Saw the wooden parts neatly into shape using the Dremel® DSM20 compact saw and the DSM500 multi-purpose carbide cutting disc. To cut the metal sheet to shape, switch to the DSM510 metal cutting disc and you can be sure of clean cuts.

    Step36

    Drill clean holes with Dremel Multi-tool and 1/4" wood drill bit

    The Dremel® 4200 now comes into its own. With this Multi-Tool and a 1/4" wood drill you will drill clean holes in the wood. Simply follow the instructions in the drawing. Superimpose ten of the diamond shaped pieces of board over each other and glue them together.

    Step46

    Fix the elements with glue and dowels and then paint with acrylic

    Assemble the remaining parts of the wooden shelf - except for the two bracket elements at the top - and transfer the drill holes to the part that lies below it. Then fix the individual elements with glue and dowels. Once the glue has dried, paint the shelf white using acrylic paint.

    Step56

    Spray paint metal parts black for the front of the shelf

    The metal parts that are later to serve as trim strips for the front of the shelf are spray-painted black. Screw the angle brackets onto the outer top edges of the shelf. You may also sand the front of the shelf. Fix the shelf to the wall and glue the two upper bracket elements to the angle brackets.

    Step66

    Using double sided tape, fix the black metal parts to front of shelf

    Finally, attach the black metal parts to the front of the shelf using double-sided adhesive tape and your bookshelf in its minimalist modern design is ready to use.


    Warning

    To reduce the risk of injury user must read instruction manuals for all tools used in this project. Wear eye and respiratory protection. Use clamps to support work piece whenever practical.