Garden Stake

  • Difficulty
    Easy

Introduction

Add some character to your garden by creating a "family tree" garden stake! We'll get you started with a Template for this season. Use the NEW Moto-Saw to create a new stake for each season!

You need
  • Stain or paint & sealer of your choice & paintbrush
  • Spray Glue
  • Thin craft wood like balsa wood or plywood
L: Length, W: Width, H: Height, D: Diameter

Step By Step Instructions

Step 1 3

Step 1

tracing the design

Begin by laying out your design on your craft wood material. You can either trace a design or adhere it in place with spray glue as we did with the tree stencil (provided in this project).

Step 2 3

Step 2

cut out design

Using your Moto-Saw and the Side Cutting Blade, cut along your template. You may find it easier to clamp your plywood to your workbench and cut the piece using the Moto-Saw in the handheld position. Run your tool at a speed setting of 6 for this application. Tip: Remember to let the speed of the tool do the work and do not force the blade through the plywood.

Step 3 3

Step 3

stain wood

Add any finishing touches and paint as desired. Use a hoe or a shovel to create a divot for your stake and plant it firmly into place.


Warning

To reduce the risk of injury user must read instruction manuals for all tools used in this project. Wear eye and respiratory protection. Use clamps to support work piece whenever practical.