Question 1

How to use the Versa?

Accepted Answer

To get the best performance from the tool we’d like to offer the following tips: Charging Your Tool: Before using your product, please charge your tool for at least two hours. This will ensure that you have full battery potential for your first project. You will know you’re charging when the blue light is illuminated. When the tool is fully charged (after approximately two hours) the charging will automatically stop and the blue light will turn off.
Using Your Tool: If you find that your tool is turning off during use, try reducing the pressure you use. The tool is designed to stop if too much pressure is applied. Let the tool do the work. If you are not getting the desired results, use a more aggressive cleaning pad. Wet your pad before use and consider using dish soap. This will help your pad to operate smoothly.

Question 2

Can I clean my car with the Versa?

Accepted Answer

Bristle Brush, Corner Brush, Eraser Pad, Non-scratch pad, and heavy duty pad can be used for cleaning your car. The Versa Power Cleaner is only recommended for cleaning the headlights on an automobile.; Using the white foam pad and polishing compound specifically for headlights, can be done. Make sure to apply masking tap around the headlight so the pad does not run into the painted body parts. We recommend using light pressure with the tool and use the splash guard attachment so the compound will not spray over the car. Other surfaces on a car are not designed to be cleaned with the pads.

Question 3

Versa PC10 - What is it?

Accepted Answer

Tough cleaning jobs are a thing of the past with the powerful and versatile Dremel Versa. High-speed scrubbing, in a compact size, is ideal for tackling soap scum, baked on food, difficult grease, dirt and much more. The Lithium-Ion battery charges fast and is perfect for indoor and outdoor, dry and wet uses. The light-weight and compact design is ideal for single hand use and to tackle hard to reach places. Accessories changes are fast with the hook and loop interface. Switch from tile to glass, or upholstery to metal in no time, and use the Dremel Versa with our without water and cleaner based on the application.; For more information go to Dremel PC10.

Question 4

Versa PC10 Accessories Pads - Cleaning Pads

Accepted Answer

When finished using the cleaning pad, take it off the backup pad, rinse it with water and set it aside to dry. After the pad gets worn, replace the pad with a new one.

DREMEL® Versa (PC10-1/10)

DREMEL® Versa (PC10-1/10)

Ordering information