Unleashing the Power: Dremel® MAX Carving Bits Guide

Power Carving bits on display.
  • Difficulty
    Easy

Let's go - step by step

Step15

Flame Power Carving Bit - Dremel® MAX 9953

Power Carving Bit carving wood.

The Dremel® MAX 9953 Flame Power Carving Bit offers 2X faster material removal than its predecessor, the Dremel 124. With a 3/8” wide 'flame' profile, it’s perfect for concave and V-cuts, grooving, and detailed profile carving.

You can effortlessly carve wood, plastic, foam, and rubber with aggressive carving and efficient material removal. Remember this accessory is not compatible with Stylo+, Dremel Lite, and Dremel 7350.

 

Usage Tips:

Let your Dremel Multi-Tool and the accessory do the heavy work. Use the sides at an angle less than 90 degrees for optimal results. Adjust the RPM if excessive chatter occurs.

Step25

Ball Shape Power Carving Bit - Dremel® MAX 9951

Power Carving Bit carving wood.

Dremel 9951, your new power carving essential, boasting 2X faster material removal than the Dremel 114. The 11/32” diameter 'ball' profile allows for undercuts and aggressive shaping of concave surfaces.

It’s ideal for aggressive material removal and effortless smoothing. Crafted with rust-resistant stainless steel teeth, it's your accessory for tough carving jobs. Not recommended for use with Stylo+, Dremel Lite, and Dremel 7350.

 

Usage Tips:

Use the accessory and your Dremel Multi-Tool without excessive force. Adjust the RPM for a smoother result if excessive chatter is noticed.

Step35

Ball Nose Power Carving Bit - Dremel® MAX 9954

Power carving bit carving wood.

The Dremel accessory 9954 offers a 2X faster material removal compared to Dremel 117. The 5/16” wide 'ball nose' profile allows for round detailed shapes and carving large flat surfaces. It's versatile, creating undercuts with no difficulty.

Ideal for sculpting with its robust stainless steel teeth. Craft intricate, rounded shapes, tackle large flat surfaces, and create undercuts. Not compatible with Stylo+, Dremel Lite, and Dremel 7350.

 

Usage Tips:

Let the accessory and Dremel Multi-Tool handle the task without excessive force. Adjust the RPM for a smoother outcome if excessive chatter occurs.

Step45

Small Taper Power Carving Bit Dremel® MAX 9952

Power Carving line into the DIY wooden spoon.

The Dremel 9952 Power Carving Bit accessory secures 2X faster material removal than the Dremel 9910. With a ¼” wide 'small taper' profile, it offers accessibility into small, hard-to-reach areas and carving deep holes.

Strongly remove material, smooth the workpiece, and carve thin, accurate lines. Not recommended for use with Stylo+ or Dremel Lite.

 

Usage Tips:

Let your Dremel Multi-Tool accessory do the heavy lifting. Adjust the RPM for a smoother outcome if excessive chatter is noticed.

Step55

EZ Speedclic Sanding Discs - Dremel® MAX SC411DM

Sanding Disc on a rotary tool sanding woodens surface.

The SC411DM accessory is a game-changer with a remarkable 20X longer lifespan compared to Dremel SC411. This set includes three 60 grit sanding discs for shaping and smoothing various materials.

It’s best for shaping and smoothing a variety of materials and it’s compatible with the EZ Lock system for quick accessory change.

 

Usage Tips:

Pair with the SC402 Mandrel using Dremel's Easy SpeedClic system for 6X faster accessory changes. Ensure your Dremel tool faces the workpiece, and focus on the disc's center for optimal results.


Warning

To reduce the risk of injury user must read instruction manuals for all tools used in this project. Wear eye and respiratory protection. Use clamps to support work piece whenever practical.